Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Inglewood
Gate hinge worn through? Post leaning after winter rain? A cracked weld letting your swing gate twist? That’s the work we do every week in Inglewood. Salt-laden marine air off the Pacific, rolling in through the coastal marine layer, corrodes iron and steel gate hardware measurably faster here than in drier parts of LA County. So hinge replacement, post resetting, rail repair, and custom welding are our bread and butter across 90301, 90302, and 90303. We’re Ironworks Gate Co., and we’ve been fixing gates for over 42 years. If you need Gate Parts & Welding done right, call us at (916) 398-2696.
Why Ironworks Gate Co. Is Inglewood’s Preferred Gate Parts & Welding Company
Inglewood homeowners don’t have time for crews that show up late, quote one number, and bill another. Around here, a sagging ornamental gate isn’t a cosmetic issue. It’s a security problem and an operator failure waiting to happen. Our Gate Parts & Welding in Inglewood teams know the difference between a 1960s wrought iron picket that can be re-welded and one that’s too fatigued to save. We tell you straight, quote before we turn a single bolt, and most jobs are done in one visit.
Two things set us apart in Inglewood specifically. First, we carry the parts local gates actually need: schedule-40 steel sleeves, heavy ornamental picket stock, weld-in hinge plates, and replacement rollers sized for the postwar bungalow gates that dominate streets off Crenshaw and La Brea. Second, our written 90-Day Done Right Promise. We come back if it’s not right. No arguing, no paperwork. It’s the Keystone Standard, applied to every hinge, weld, and post footing we touch.
Background-checked, uniformed technicians work every job. A live person answers the phone 24 hours a day, 7 days a week. Not a voicemail, not a call center. When your gate won’t close in Inglewood, you get a human on the line.
Our Gate Parts & Welding Services in Inglewood
Hinge Replacement
Marine air is hard on gate hinges. Pin bores corrode from the inside, panels sag, and at some point the hinge binds so badly the gate operator strains and trips. We see it constantly on 1940s and 1950s ornamental gates across Inglewood’s bungalow blocks. We replace worn hinge pins, re-bore and sleeve the hinge plate holes, and weld in new heavy-duty hinges when the originals are beyond saving. A hinge replacement on a standard single swing gate in Inglewood typically runs $220 to $480 including parts and labor, depending on whether we’re sleeving the existing plates or welding in new hardware.
Post Replacement
Inglewood’s brief but intense winter rain events pool water at gate-post bases. Concrete footings crack, the post tilts, and any automated swing gate loses alignment fast. We dig out the old footing, set a new schedule-40 steel post in fresh concrete, and re-hang the gate so it tracks straight. If the original post is ornamental and still sound, we’ll sleeve it and keep the look. Post replacement and resetting in Inglewood runs $350 to $900 depending on soil conditions and whether the old footing needs full removal.
Rail Repair
Bottom rails on Inglewood gates live close to concrete and catch salt condensation, year after year. Original 1960s-era welds crack there first, letting the panel twist out of square. We cut out the failed section, fishplate or replace the rail, and weld it so the gate panel stays rigid. Rail repair jobs around Inglewood usually land between $180 and $400, and can often be completed the same visit as the inspection.
Custom Welding
When a picket is cracked, a hinge mount is torn, or a homeowner wants to match an original ornamental pattern, custom welding is the answer. We weld in matching steel stock, shape and dress the joint, and prime and paint to match. In the 90302 streets off Arbor Vitae, we’ve matched dozens of mid-century picket patterns where replacement panels simply don’t exist anymore. Custom welding in Inglewood starts around $150 for a single picket repair and runs up to $1,200+ for multi-point structural work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Inglewood
Most Inglewood repair calls mix iron work with operator work: a sagging gate throws a Linear, DoorKing, or Viking operator out of alignment, and fixing the metal without re-zeroing the operator leaves the gate binding. Our techs are trained and equipped on nine major opener brands including Linear, DoorKing, and Viking, so whatever is bolted to your gate post, we service it correctly the first visit. We stock local parts for Inglewood jobs, including safety photocells, limit switches, and hinge hardware sized for the heavy ornamental gates common here.
Common Gate Parts & Welding Problems We See in Inglewood Homes
- Salt corrosion through hinge pin bores. Marine humidity eats hinge pins from the inside out on 40-70 year old ornamental gates. The panel sags, then the operator strains against the bind and eventually trips a limit or burns a gear.
- Leaning gate posts after winter rain. Pooling water at the base cracks concrete footings. A one-inch post lean is enough to throw an automated swing gate out of alignment within a single season, especially on the mid-century bungalow lots across 90301 and 90302.
- Cracked welds at the bottom rail. Salt moisture collects where the gate panel meets concrete. Original 1960s welds crack there, the gate twists, and the damage spreads upward through the pickets.
- Worn or seized gate rollers on slide gates. The 1960s and 1970s apartment stock along Prairie Avenue runs a lot of slide-gate hardware that’s now decades past its service life. Worn rollers chew up tracks and overload the motor.
Pricing for Gate Parts & Welding in Inglewood, CA
Here’s what Inglewood homeowners should expect for common gate parts and welding work. Hinge replacement: $220 to $480. Post replacement or resetting: $350 to $900. Bottom rail repair: $180 to $400. Single picket custom weld: $150 to $300. Full structural welding, including multiple pickets, rail sections, and hinge plates: $600 to $1,200+. Inglewood’s salt corrosion means rust damage is often deeper than it looks from the curb, so we quote after we see the gate, not over the phone. The price we quote is the price you approve before any work starts. Every completed job carries our 90-Day Done Right Promise. Call (916) 398-2696 for a free estimate on your gate.
We Also Serve Cities Near Inglewood
Ironworks Gate Co. runs crews throughout the South Bay and adjacent neighborhoods. Beyond Inglewood, we handle gate parts and welding calls in Hawthorne, Lawndale, Gardena, and Redondo Beach. If your gate is anywhere near the 405 or the 105, there’s a good chance we’re already scheduled nearby this week. Dispatch and scheduling coordinate from our Los Angeles office, and crews serve Inglewood locally every day.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Inglewood
Inglewood sits about five miles from the Pacific. The persistent marine layer carries salt-bearing humidity inland most of the year, and that salt attacks bare iron and steel hinge components far faster than the drier Valley air does. Exposed welds, unpainted hinge pin bores, and bottom rail sections near concrete oxidize visibly within a season or two in Inglewood. Regular lubrication helps, but the real fix for corroded hinge pin bores is re-boring and sleeving the plates with new hardened steel pins. Call (916) 398-2696 if your hinges are binding.
Yes, in most cases. If the picket is cracked but not extensively rusted through, we cut out the failed section, weld in matching steel stock, and shape and dress the joint so it’s nearly invisible after paint. This is standard work for us on the 1940s and 1950s bungalow gates scattered across 90301, 90302, and 90303. If multiple pickets are failed or the bottom rail is also cracked, we’ll quote the full structural repair honestly. Estimates are free.
Yes, and quickly. A leaning post throws the hinge geometry off, so the gate panel binds, drags, or sits crooked against the open and close limits. The operator works harder, and Limit and safety sensor readings drift. In Inglewood, where winter rain pools at gate-post bases on flat bungalow lots, this is one of the most common causes of automated gate failure. The fix is to reset the post footing in fresh concrete, then re-hang and re-align the gate. Call us at (916) 398-2696 and we’ll come look.
Yes. Automatic gates in Inglewood are required to have entrapment protection: monitored safety photocells, reversing edges, or both, depending on the gate and operator. This is a safety requirement, not an option. If your gate predates current standards or the photocells have failed, we replace them as part of any weld or hinge job where we touch the operator. Our techs reinstall and verify the entrapment protection on every automated gate service call.
Sagging usually comes from one of three things: worn hinge pin bores, a leaning post, or a failed bottom rail weld. We diagnose which one applies. Hinge pin bores get re-bored and sleeved. A leaning post gets reset in new concrete. A cracked bottom rail gets cut out and re-welded. On a 1940s bungalow off Arbor Vitae, our crew re-bored the original hinge post, welded new schedule-40 sleeves onto fatigued pickets, reset the post footing, and reinstalled the LiftMaster operator with fresh safety photocells. The gate tracked dead straight and silent. Call (916) 398-2696 for a free estimate, and we’ll tell you exactly what’s causing the sag and what it costs to fix.
If your Inglewood gate is sagging, rusted, leaning, or cracked, call Ironworks Gate Co. at (916) 398-2696. A live person answers. We’ll schedule a time, show up when we say, and quote the work before anything gets touched. Free estimates, upfront pricing, and a written 90-Day Done Right Promise on every gate parts and welding job in Inglewood.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Inglewood and surrounding communities.