Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Manhattan Beach
Gate installation in Manhattan Beach costs between $1,800 and $7,500 for most residential driveway and pedestrian gates, with the final number set by gate type, material, automation, and how much salt-corrosion repair your posts need before new hardware goes in. We quote the price before any work begins and you sign off on it, so there are no surprises on the bill. Our crews know the Sand Section alleys, the Tree Section lots, and the Hill Section driveways the way only a company that has done this locally for years can. If you need a gate installed in Manhattan Beach, call (916) 398-2696 and a live person will answer, any hour.
Why Ironworks Gate Co. Is Manhattan Beach’s Preferred Gate Installation Company
Manhattan Beach homeowners do not call a gate company for the first time when a gate is working fine. They call when a 20-year-old operator has died, when a post has rusted at the concrete line, or when a new build needs a gate hung correctly the first time. That is exactly the kind of work our crews do most often here. We have built our reputation in Manhattan Beach on showing up clean, quoting straight, and standing behind the work with a written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing.
Every completed job in Manhattan Beach carries that same guarantee, and every technician who walks onto your property is background-checked, uniformed, and works by a simple code: Krafted right, Every time, Your home first, Standing behind it. Victor Salinas set that standard when he founded this company, and it has not changed. Manhattan Beach customers consistently tell us the same thing: the gate closes like the day it was hung. That is the point.
We coordinate dispatch and scheduling from our Los Angeles office, and crews serve Manhattan Beach locally throughout the week. We do not route you through a national call center or make you leave a voicemail. You call, you describe the gate, and we get a technician out. On repair calls to Manhattan Beach we move fast, and on installation work we schedule a free measure and a written price before a single bolt is turned.
Our Gate Installation Services in Manhattan Beach
We install residential gates only. No commercial warehouse roll-ups, no apartment complex jobs. Just driveway gates, pedestrian gates, and estate gates serving Manhattan Beach homes from the Sand Section up to the Hill Section. Each installation starts with a look at how your lot is actually shaped, because a gate that works on paper does not always work on a 30-foot-wide frontage two blocks from the Strand.
Driveway Gate Installation
Driveway gates in Manhattan Beach run the full range: simple single-swing gates on Tree Section ranch homes, double-swing gates on newer Hill Section builds, and cantilever slide gates on lots with tight setbacks. We pull permits when the city requires them, set posts in marine-grade concrete below the frost line, and build every gate so the operator does not have to fight the geometry. On a typical double-swing driveway gate install in Manhattan Beach, we are on site for one to two days, and the automation is programmed before we leave.
Pedestrian Gate Installation
Pedestrian gates in the Sand Section are a fixture of the walk street lifestyle. Many homes on Manhattan Beach’s car-free lanes off Highland Avenue and the Strand have no front vehicle access at all, so the pedestrian gate is the primary entry point. These gates are smaller, but the corrosion load is worse because they sit directly in the ocean breeze. We use marine-grade hinges, stainless fasteners, and powder-coated frames rated for salt air. A well-built pedestrian gate in Manhattan Beach should last decades, not years.
Sliding Gate Installation
Sliding gates are the right answer for Manhattan Beach lots where a swing gate has no room to swing. That is common in the Sand Section, where alley-fronted properties sit on very narrow lots and a swinging gate would hit a wall or a neighbor’s fence. A cantilever slide gate rides on rollers and never touches the ground, which matters in Manhattan Beach because ground-contact components rust faster here than almost anywhere in the South Bay. We frame, weld, and hang the gate, then set the operator and safety loops so the gate stops and reverses on obstruction.
Swing Gate Installation
Swing gates remain the most common gate type in Manhattan Beach’s Tree Section and Hill Section, where driveways have enough apron for a full swing. The trick in this city is not the gate itself. It is the post. Salt air rusts the base of a hinge post inside the concrete, and a gate that looked plumb at install will lean and bind within two or three years if the post footing was not poured deep and wrapped. We set swing gate posts in marine-grade concrete with a deeper footing than inland code calls for, because Manhattan Beach is not inland.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Manhattan Beach
Our technicians carry certification and parts stock for the automation brands you actually see on Manhattan Beach driveways: FAAC, BFT, Linear, and Viking among them. A lot of high-end Manhattan Beach homes run FAAC operators, especially on custom swing gates, and we stock FAAC control boards, photocells, and remotes locally so a repair does not stall waiting on a shipment. If your gate runs BFT, Linear, or Viking, our crew diagnoses it the same day. We do this across nine major brands, and we have been doing it for over 42 years across the region.
Common Gate Installation Problems We See in Manhattan Beach Homes
- Post footing erosion: Salt air and moisture rust the base of the hinge post inside the concrete, which makes the gate lean and bind before the operator ever fails. We see this constantly in the Sand Section, where posts set in the 1980s and 1990s are now at the end of their life.
- Wrong geometry on alley gates: Standard swing-gate kits assume a front setback and a driveway apron. On Manhattan Beach’s narrow alleys, a gate hung for inward swing hits the wall or the neighbor’s fence. That mistake costs a homeowner a full re-hang, and it is the most common reason we get called to fix another contractor’s install.
- Obsolete control boards without entrapment protection: Many legacy Manhattan Beach operators from the 1990s lack UL 325 photo-eyes. Reusing the old board with a new motor leaves the gate non-compliant and unsafe, and no reputable company should do it. We replace the board and add the safety photocells as part of the installation.
- Marine-layer corrosion on fasteners: Even stainless steel fasteners corrode faster in Manhattan Beach than the manufacturer expects, because the year-round marine layer and salt-laden onshore wind accelerate oxidation. We cut inspection and lubrication intervals nearly in half here compared to inland recommendations, and we spec fasteners accordingly.
One thing this Manhattan Beach page will tell you that generic gate installation guides never mention: how we handle rear-alley gate geometry and the salt-corrosion timeline. That is the work. That is what separates a gate that lasts fifteen years from one that sags in three.
Pricing for Gate Installation in Manhattan Beach, CA
Gate installation in Manhattan Beach runs on honest, quoted numbers. A single pedestrian gate, frame and hinges included, typically runs $1,800 to $3,200. A standard single swing driveway gate with operator runs $2,800 to $5,000. A double swing or cantilever slide gate, which is common on the wider Tree Section and Hill Section lots, runs $4,000 to $7,500 installed with automation. Those ranges assume a healthy post footing; if we need to dig out and re-pour a corroded post base, that adds $400 to $900 per post, which we will show you on the written estimate before any work starts. Senior and veteran customers get a 5% discount, always, and we offer a free second opinion on any written estimate you already have.
We do not bid low and bill high. The price we agree on is the price you pay. Call (916) 398-2696 for a free measure and a written quote.
We Also Serve Cities Near Manhattan Beach
Our crews also handle Gate Installation in Torrance, Redondo Beach, Lawndale, and Carson. If your property is one block over the Manhattan Beach line, the same team serves you with the same written guarantee. For Manhattan Beach itself, our deepest experience is in the Sand Section, Tree Section, and Hill Section, and you can read more about that on our Gate Installation in Manhattan Beach page.
Serving Manhattan Beach, CA - Our Local Coverage Area
We’re based in the Manhattan Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Manhattan Beach
Yes, in most cases. Rear alley gates in the Sand Section face the full ocean breeze with no windbreak, so we spec stainless steel or marine-grade aluminum hinges and a deeper post footing than a standard driveway gate would need. The hinge geometry often has to be reversed too, because the gate swings from the alley side toward the house rather than from the street side. Our crews know the difference, and we will show you exactly what we are changing and why on the written estimate. Call (916) 398-2696 if your alley gate is sagging or binding.
We will not reuse an obsolete control board that lacks UL 325 entrapment protection, because that leaves the gate non-compliant and unsafe for children, pets, and vehicles. You can keep the motor housing if it is in good shape, but the control board and safety photocells get replaced as part of the installation. It is a small cost relative to the liability, and it is the only way we will put our name on the job. Free estimates on all installs: (916) 398-2696.
Manhattan Beach sits directly on the Pacific with no inland buffer, and the salt-laden onshore wind coats everything within a few blocks of the water in a film of salt and moisture. That combination attacks the steel at the concrete line, where the post is trapped in damp, salty soil and cannot dry out. Torrance is a few miles east and gets measurably less salt exposure. A Manhattan Beach post set without marine-grade concrete and a proper drain path can rust at the base in two to three years. We pour deeper footings and wrap the post base before concrete goes in.
If the frame is cracked or the hinge side has pulled away, welding can often save the gate panel itself. But if the post is leaning or rusted at the concrete line, welding will not fix it. The gate will keep binding, the operator will strain, and the motor will eventually burn out. A new post footing in marine-grade concrete runs $400 to $900 and is the only repair that actually holds in Manhattan Beach conditions. Bring us your gate, and we will tell you straight which one it is. Call (916) 398-2696.
On a 30-foot frontage, a slide gate or a reverse-swing gate usually beats a traditional inward-swinging panel, because there is rarely room for the gate to swing into the setback without hitting the house or the walkway. We typically recommend a linear operator like BFT or Linear for slide gates, or a FAAC swing operator with a reverse-swing hinge set for alley-mounted gates. We will measure the actual lot line and tell you what fits before anything is ordered. Estimates are free: (916) 398-2696.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Manhattan Beach with honest gate installation and repair work.