Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Parts & Welding in Gardena: What to Know First
We provide independent Linear gate parts and welding service across Gardena, with most hinge, roller, and weld repairs completed in a single visit. A typical Linear gate parts job in Gardena runs between $180 and $650 depending on what has worn out, and you’ll know the exact price before we turn a single bolt. If your Linear opener is still strong but the gate itself is sagging, dragging, or pulling away from its post, you’ve found the right page.
This page is written for Gardena homeowners who own a Linear swing or slide gate and need straight answers about parts, welding, and what it costs. Call (916) 398-2696 and a live person answers, day or night. No voicemail trees, no callback queues.
How Linear Products Fail – and How We Fix Them
- Hinge weld fatigue on Linear swing gates. The Linear LRA and LRD swing-arm operator series works by pushing and pulling the gate leaf through a steel bracket. Over years in Gardena’s sun and occasional salt air, the bracket weld at the post side takes repeated stress cycling. We regularly see hairline cracks developing at the toe of the weld, invisible until the gate starts shivering on open. The fix is grinding out the old weld, re-welding with proper penetration, and often adding a gusset plate so the load path changes entirely. A patch weld alone will fail again.
- Roller bearing seizure on Linear slide gates. Linear slide operators like the SLR and older SL series move a gate that rides on steel rollers. In Gardena, fine dust from the 110 and 405 corridors works into unsealed roller bearings, mixes with old grease, and seizes them. The gate starts groaning, then the operator motor strains and trips its thermal overload. We replace rollers with sealed-bearing units and true the track while we’re there, because a seized roller left too long will wallow out the track rail and turn a $200 parts job into a $900 rail replacement.
- Post loosening at the operator mount. With Linear swing operators, the post that holds the operator head takes every push and pull. On older Gardena homes where gate posts were set in the 1980s and 1990s, the concrete footing is often undersized or cracked. The post leans, the operator arm binds, and the motor works against mechanical resistance until it burns out. We reset posts in proper footings or add a welded steel extension plate to redistribute the load, depending on what the existing concrete will honestly hold.
- Rack and chain wear on Linear slide models. Linear slide gates use a chain drive or a gear-and-rack setup. After twenty years the chain stretches, the links wear thin, and the sprocket teeth start to hook. A stretched chain will jump teeth a couple times a year, and each jump sends a shock load through the motor. We measure chain elongation with a simple gauge, and if it is beyond spec we replace both chain and sprockets together. Swapping only the chain onto a worn sprocket guarantees another failure within months.
- Latch and lock misalignment after panel repairs. When a Linear gate panel gets dented by a backed-in van or a delivery truck, homeowners think it is cosmetic. But a dented panel is often a racked panel, and a racked panel pushes the latch out of alignment with the receiver. The opener keeps trying to close against a misaligned latch, the safety edge reverses it, and the owner assumes the board is failing. We straighten and re-weld the panel rails, then realign the latch so the gate closes square again without force.
Our Linear Gate Parts & Welding Process
- 1
You call, a person answers. When you reach us at (916) 398-2696, a live dispatcher takes your information and schedules a visit. No answering service, no automated maze.
- 2
We inspect the gate as a system. On a Linear job, Victor Salinas or one of our technicians looks at the gate itself first: hinges, welds, rollers, posts, track, rack, chain, and latches. Then the operator. A gate that fights the motor kills the motor, so the metal work comes first.
- 3
We give you the price before work starts. You will know the full cost for the repair with OEM or quality aftermarket parts, the difference between them, and what is optional. Nothing gets ordered, welded, or replaced until you have agreed to the number.
- 4
We do the work. Welding is done on-site wherever possible. We mask nearby surfaces, keep a fire watch on welding, and grind and dress every weld so it looks like it belongs on the gate, not like a patch.
- 5
We test the gate through real cycles. The gate runs open and close repeatedly under load. We check the safety edges, the stop points, and the operator limits. If the Linear opener is working harder than it should, we adjust until it is not.
- 6
We stand behind it in writing. Every job carries the 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing.
What Linear Gate Parts & Welding Costs in Gardena
| Job | Typical Gardena Price Range |
|---|---|
| Hinge replacement (single swing gate, steel hinges) | $180 – $320 |
| Weld repair, cracked hinge or bracket (grind, weld, dress) | $140 – $260 |
| Post replacement, dug out and re-set in concrete | $450 – $850 |
| Roller replacement, sealed-bearing, track truing included | $220 – $420 |
| Chain and sprocket replacement (Linear slide gate) | $300 – $550 |
| Panel straightening and latch realignment | $250 – $500 |
What moves the price: how thick the original steel is, whether the post footing is sound, and whether we are matching existing work or replacing a whole section. Aftermarket parts are almost always available and cost less. OEM Linear parts exist for most current models, but for a twenty-year-old opener, aftermarket is often the only honest option. Call (916) 398-2696 for a free estimate; the number you get is the number you pay.
Why Gardena Homeowners Call Ironworks Gate Co. for Linear Work
We have been serving Gardena and the South Bay since 1984, and we plan to be here another forty years. That changes how we weld: we do not do patch work that gets someone else a call in eight months. We do the fix that holds.
Our technicians are trained on Linear equipment and on eight other gate-automation brands – LiftMaster, Mighty Mule, Ghost Controls, DoorKing, and the rest. That matters because many Gardena gates have been through two or three opener brands over the decades. A technician who only knows one brand will misread symptoms and sell parts you do not need. We see the whole driveway, not just the logo.
Every job gets the 90-Day Done Right Promise in writing. A live person answers the phone 24 hours a day, seven days a week. Our techs are background-checked and uniformed, and they work in your yard the way they would work in their own mother’s yard. Victor Salinas grew up in Norwood Park, and he says it plainly: a gate should open when you need it to. That is the whole job.
Active offers: $50 off any repair over $250, free second opinion on any written estimate, $89 seasonal tune-up, and a 5% senior and veteran discount, always.
FAQs
We can source OEM Linear parts for most current models, and we are honest about when a quality aftermarket part is the better value. For older Linear operators that the factory no longer supports, aftermarket is often the only option. We tell you which is which, show you the price difference, and let you decide before we order anything.
We are an independent Linear service provider, not an authorized Linear repair center. We do not process Linear warranty claims on their behalf. That said, for a gate parts and welding job like a hinge, roller, or post repair, the Linear operator warranty is rarely relevant, since those parts are part of the gate itself, not the operator. If your operator has a warranty question, we can point you to the right contact, but the metal work is ours.
Most hinge, bracket, and roller repairs are completed in one visit, usually two to four hours. If a post needs to be re-set in concrete, that is a two-day job because the concrete must cure before we re-hang the gate. We will tell you which one you are looking at when we give the estimate.
For a gate that will not open or close, we prioritize those calls and can often be on site the same day. For non-emergency parts and welding work, schedule is typically within two to three days. Call (916) 398-2696 and tell the dispatcher what is happening; we will tell you honestly when we can be there.
If the steel itself is sound and the failure is at a weld, hinge, or roller, welding is almost always the better deal, usually a fraction of the cost of a new gate. If the gate is rusted through in multiple places or the posts are shot, replacement may be the honest call. We will show you what we see and let you decide with real numbers in front of you.
Yes. Many Gardena driveways have a Linear gate that was later fitted with a LiftMaster, Mighty Mule, Ghost Controls, or DoorKing opener. We service all of those brands, so the gate parts, welding, and the operator get handled by the same team on the same visit.
Call (916) 398-2696 for a free estimate on Linear gate parts and welding in Gardena. The price is quoted and agreed before any work starts, and the job is backed in writing by the 90-Day Done Right Promise.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Gardena and nearby areas.